INSTR-CORE SCHEMA
Keithley 2602B
This page exposes the command, limit, state, and safety contract that instr-core can load for validation and dry-run planning.
REGISTRY KEY
instr-core lookup contract
- instrument_key
- keithley/smu/2602b
- public entity ID
- instr:keithley/smu/2602b
- schema version
- 0.3.0-demo
- schema status
- derived
- record version
- 0.1.0-demo
- record status
- unverified
VALIDATION CONTRACT
Limits and commands
These fields are shaped to match instr-core Python InstrumentSchema model.
Global limits
- power
- max 40.4 W
- current
- max 3.03 A
- voltage
- max 40.4 V
Commands
| SCPI | Range | State | Safety |
|---|---|---|---|
SOUR:VOLTSet voltage source level. Range depends on configured voltage range. | 0...40.4 | SOUR:VOLT | 5 rule(s) |
SOUR:VOLT:RangeSet voltage source range to optimize resolution and accuracy. | 0...3.03 | SOUR:VOLT:Range | 5 rule(s) |
SENS:CURR:RangeSet current measurement range for best resolution. | 0...40.4 | SENS:CURR:Range | 5 rule(s) |
SOUR:VOLT:ILIMSet current compliance (limit) to protect DUT. | 0...40.4 | SOUR:VOLT:ILIM | 5 rule(s) |
SOUR:CURRSet current source level. Range depends on configured current range. | 0...3.03 | SOUR:CURR | 3 rule(s) |
SENS:VOLT:RangeSet voltage measurement range for best resolution. | 0...40.4 | SENS:VOLT:Range | 3 rule(s) |
SOUR:CURR:VLIMSet voltage compliance (limit) to protect DUT. | 0...3.03 | SOUR:CURR:VLIM | 3 rule(s) |
SOUR:SWE:VOLT:LINConfigure linear voltage sweep with start, stop, and step. | 0...40.4 | SOUR:SWE:VOLT:LIN | 4 rule(s) |
SOUR:SWE:VOLT:LOGConfigure logarithmic voltage sweep for wide dynamic range. | 0...3.03 | SOUR:SWE:VOLT:LOG | 4 rule(s) |
TRIG:TRAN:DELSet trigger delay for sweep point settling. | 0...40.4 | TRIG:TRAN:DEL | 4 rule(s) |
SOUR:PULS:VOLTSet pulse voltage level. | 0...10 | SOUR:PULS:VOLT | 4 rule(s) |
SOUR:PULS:WIDTSet pulse width in microseconds. | 0...100 | SOUR:PULS:WIDT | 4 rule(s) |
SOUR:PULS:DELSet pulse delay before measurement. | 0...10 | SOUR:PULS:DEL | 4 rule(s) |